Specifications

  • ARM® Cortex™-A72 quad core with NEON™ DSP instructions

  • 32-bit internal processing

  • 16-voice polyphony with per-voice filters

  • A global pool of 4096 stereo grains. This means that all the grains can be distributed to the 16 voices of polyphony, but also all into a single voice!

  • Headphone amplifier

  • 12V/2.5A DC power supply (5.5/2.1 mm, center-positive)

  • Dual 6.35 mm jacks for audio output, up to 10 Vpp or 13 dBu
    (either headphone or separate left and right channels)

  • 6.35 mm stereo jack for audio input, up to 5.9 Vpp or 8.6 dBu
    (line in or instrument switchable)

  • Internal microphone

  • MIDI TRS input and output ports
    (Type A and B switchable in settings)

  • USB MIDI host and device ports
    (both capable of input and output)

  • Micro SD card slot and USB flash drive support for storage and data transfer

  • Firmware easily upgradable with a USB flash drive or micro SD card

  • VESA-compatible mounting holes on the rear panel (100×100 mm spacing, M4 screws. Absolute maximum thread depth inside Tempera is 5 mm)

Health and safety

Use common sense when handling Tempera. Standard guidelines for handling electronic devices apply, which, among others, are:

  • Use only the supplied power supply (PSU-02).

  • Do not expose the machine to any liquids or excessive levels of humidity.

  • Do not use screws longer than 5 mm for the rear panel mounting holes.

Tip

Found a bug or something is not working as you expect? Reach out to us at makers@beetlecrab.audio or on our Discord server.